To power ON your SideLine Scout System follow these steps:
- Open the SideLine Scout Case and verify you have a blue cable running from your Access Point (AP) and a black power cord.
- Plug the blue cable into the middle port labeled AP and plug the black power cord into the bottom right corner. Plug the other end of the black power cord into a wall outlet.
IF YOU ARE USING A CAMCORDER CAMERA
- Using an HDMI to HDMI mini cable, plug the smaller end (HDMI mini) into your camera, and the normal HDMI end into the SideLine Scout port labeled HDMI on the left side.
- Power on your camera.
- Flip the four (4) red switches on the SideLine Scout system from left to right.
IF YOU ARE USING A NETWORK CAMERA
- Using an Ethernet cable plug one end into the Network Port on your SideLine Scout System, and the other end into your Network Switch
- Flip the four (4) red switches on the SideLine Scout System from left to right.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article