Setting a Camera's Delay
1. From the Main Menu highlight the camera you would like to Change the Delay for.
2. Press and Hold the touchpad on the Apple TV Remote until the camera menu is visible.
3. Select Basic Settings.
4. Select Camera Delay(in seconds but no less than 3 seconds).
5. Enter the number of seconds for the delay and select Done.
6. Select Close to finalize changes.
Setting the Jump Back Distance for the camera
1. From the Main Menu highlight the camera you would like to set the Jump Back Distance for.
2. Press and Hold the touchpad on the Apple TV Remote until the camera menu is visible.
3. Select Basic Settings.
4. Select Jump Back Distance (in Seconds).
5. Enter the number of seconds for the Jump Back Distance and select Done.
6. Select Close to finalize changes.
Changing a Camera's Name
- From the Main Menu highlight the camera you would like to Change the Name for
- Press and Hold the touchpad on the Apple TV Remote until the camera menu is visible
- Select Basic Settings
- Select Camera Name
- Enter the name and select Done
- Select Close to finalize changes
Changing the Camera's IP Address
- From the Main Menu highlight the camera you would like to change the IP Address for
- Press and Hold the touchpad on the Apple TV Remote until the camera menu is visible
- Select Advanced Settings
- Select IP Address
- Enter the new IP Address and select Done (ex: 10.10.10.60 or w/port 10.10.10.60:554)
- Select Close to finalize changes
Setting the Path for a Camera
- From the Main Menu highlight the camera you would like to Set the Path for
- Press and Hold the touchpad on the Apple TV Remote until the camera menu is visible
- Select Advanced Settings
- Select Path
- Enter the path for the camera and select Done (ex: /media/s0)
- Select Close to finalize changes
Changing the Stream Type of a Camera
- From the Main Menu highlight the camera you would like to Change the Stream Type for
- Press and Hold the touchpad on the Apple TV Remote until the camera menu is visible
- Select Advanced Settings
- Select Stream Type
- Select either RTSP, RTMP, or HTTP
- Select Close to finalize changes
Setting the Username and Password for a Camera
- From the Main Menu highlight the camera you would like to set a Username and Password for
- Press and Hold the touchpad on the Apple TV Remote until the camera menu is visible
- Select Advanced Settings
- Select Username or Password
- Enter the Username or Password and select Done
- Select Close to finalize changes
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article